FAST NATIONWIDE SHIPPING | PROJECT SUPPORT | COMMERCIAL-GRADE LED SOLUTIONS

Free Shipping Sitewide on All LED Display Products Shipping from California & Florida Warehouses

Brightness is the spec that decides whether a storefront screen works during business hours. It is measured in nits, and the gap between an indoor screen and a window screen is bigger than most people expect. This guide explains what nits are, how much a window needs, and how to avoid paying for brightness you will not use.

What a nit is

A nit is a unit of brightness: one candela per square meter. It tells you how much light the screen gives off toward the viewer. Spec sheets list the maximum. In practice you will often run a screen below its maximum, especially indoors or at night.

Typical brightness by location

Where the screen is Typical brightness needed Example
Dim indoor room A few hundred nits Conference room, restaurant interior
Bright indoor space About 700 nits Retail floor, hotel lobby with daylight
Facing out through a window Thousands of nits Storefront window seen from the sidewalk
Fully outdoors in sun Thousands of nits plus a sealed enclosure Drive-throughs, building fronts

Our indoor fine-pitch LED displays run at 700 nits, which suits most indoor spaces. Our window LED displays run at 4,500 nits so they stay readable through glass in daylight.

Why windows need so much more

A screen that looks great inside at 700 nits can be close to invisible from outside at noon. That is why a window needs a screen made for it, not just a bigger TV.

Which direction does your window face?

Orientation changes how hard the screen has to work. A window that gets direct afternoon sun is the toughest case. A shaded storefront under an awning, or a window facing a narrow street, is easier. In almost every street-facing window, though, an indoor-brightness screen will struggle for part of the day. A 4,500-nit window display gives you headroom for the bright hours.

Will it be too bright?

A bright screen does not have to run at full power. Brightness can be turned down in the settings, and you can schedule content so evenings use darker backgrounds. Some cities also have rules for digital signs that face a street, so check local sign rules before you install.

Checklist before you buy

  1. Is the screen behind glass facing the street? If yes, plan on a window-brightness model.
  2. How far away will people read it? P2.5 suits about 8 feet and farther.
  3. Portrait or landscape? Both are available in standard sizes.
  4. Is there power near the window, and a wall or ceiling to mount to?
  5. Do local sign rules limit digital signs facing the street?

Questions

Is 700 nits enough for a window?

Usually not in daylight. 700 nits is a good level for bright indoor spaces. For a screen facing out through a window, choose a 4,500-nit window model.

Does a brighter screen use more power?

Yes, brighter LED screens draw more power at full brightness. Running a lower brightness when you do not need the maximum saves power.

Can I use a window display indoors too?

Yes. It can run at lower brightness indoors. If viewers will stand close, an indoor fine-pitch model will look sharper up close.

See every size and price on the LED signage displays page, or call 888-631-5880.