Airports, train stations, bus terminals and ferry ports are some of the busiest public spaces there are. Travellers need clear information fast, often while tired, rushed or unfamiliar with the building. Operators need to fund the space with advertising and present a strong first impression of a city. LED displays serve all three goals: they are bright enough for glass-walled terminals, large enough to be seen across a concourse, and flexible enough to switch from adverts to urgent messages in a second.
This guide covers where LED works in a transport hub, which specs suit each zone, and what is different about buying and installing displays in a 24/7 public building. To see products, visit our direct view LED video walls and outdoor LED displays, or call 888-631-5880.
Where LED works in a transport hub
| Zone | Typical display | Common pitch | Brightness |
|---|---|---|---|
| Kerbside, forecourt, parking | Outdoor signs, directional boards | About 4–10 mm | About 5,000–8,000+ nits |
| Check-in and ticket halls | Large overhead walls for information and branding | About 2.5–4 mm | About 1,000–2,500 nits, more under glass roofs |
| Security and queue areas | Queue information, instructions | About 1.8–2.5 mm | About 800–1,500 nits |
| Concourses and retail | Feature walls, column wraps, ad screens | About 1.8–3 mm | About 1,000–2,500 nits |
| Gates and platforms | Departure info, boarding messages | About 1.5–3 mm indoor; 3–6 mm outdoor platforms | Indoor about 800–1,500; outdoor 5,000+ |
| Baggage claim and arrivals | Belt info, welcome walls, ads | About 2–3 mm | About 800–1,500 nits |
Pitch follows the usual rule of thumb: about 1 m of comfortable viewing per 1 mm of pitch, with content still readable to about three times that distance in meters. Overhead walls in tall halls can be coarser because people look up from a distance; screens in queues and at gates are closer.
Information and wayfinding
Clear information reduces stress and keeps people moving. LED is now common for flight and departure boards, gate information, platform displays and directional signs. A few points matter more here than elsewhere:
- Legibility first: large fonts, high contrast and simple layouts. Test readability from the farthest point people will look from.
- Live data: displays must pull from the flight or timetable system reliably. Ask how the content software connects to your data source.
- Multiple languages and symbols: allow space for translations and standard pictograms.
- Accessibility: place screens at heights and angles that work for seated travellers, and pair visual information with audio announcements.
Advertising and revenue
Large LED walls in concourses, baggage halls and outdoor forecourts are valuable ad space. Travellers often have time to wait, and dwell times near gates and baggage belts can be long. For advertising screens, plan for scheduling software that sells slots by time and location, logs every play for advertisers, and handles standard ad formats. Sizes and aspect ratios that match common creative formats make it easier to sell the space.
Feature walls and a sense of place
A terminal is often the first and last thing a visitor sees of a city. Many hubs use a large LED feature wall in arrivals, a ribbon along a mezzanine, or a creative piece in a central hall to welcome travellers with local scenery, culture and events. These pieces make the building feel cared for and give advertisers premium space for sponsored content.
Design them with crowds in mind. Place feature walls where people naturally pause, such as the arrivals hall, not across a narrow walkway where stopping causes congestion. Keep content calm enough that it does not distract from nearby information screens.
Content tips for travellers
- Put the most important information in the same place on every screen.
- Use color consistently, for example one color for delays and another for boarding.
- Keep adverts out of the main information area on combined screens.
- Avoid fast animation near escalators, stairs and moving walkways.
Outdoor displays at hubs
Forecourts, taxi ranks, car parks and open platforms need fully outdoor-rated screens. That means brightness of about 5,000–8,000 nits or more for direct sun, an IP65 or higher front rating, and cabinets designed for heat, cold and wind. Dimming at night is important near roads and residential areas. Outdoor platform screens also face vibration from passing trains and buses, so mounting and fixings must allow for that.
Built for 24/7 operation
Many hubs never close, and information screens cannot go dark. Plan for reliability from the start:
- Redundant power and data: dual power supplies in cabinets, backup data paths and a backup processor for critical screens.
- Remote monitoring: alerts for failed modules, power faults and temperature problems.
- Front service: modules swapped quickly without closing an area.
- Spares on site: modules, power supplies and receiving cards from the same batch.
- Brightness scheduling: lower output at night saves power and LED life.
Emergency and operational messaging
In a disruption or emergency, every screen may need to show the same message immediately. Choose content software that can override scheduled content across all or selected screens, triggered by an operator or linked to the building’s alert systems where your safety team allows. Test the override as part of regular drills.
Installation in a live hub
Installing displays in an operating airport or station is not like working in an office. Expect security screening for crews and equipment, restricted work hours (often overnight), permits for lifts and hot works, and strict rules on keeping routes clear. Factor these into the schedule and cost. Plan cable routes and power with the facility team early, and confirm that structure above walkways is engineered and signed off.
What drives cost
- Number, size and pitch of screens across the hub.
- Outdoor-rated displays versus indoor.
- Redundancy and monitoring for critical screens.
- Integration with timetable, flight and alert systems.
- Overnight installation, security and access requirements.
- Advertising software and content operations.
Questions to ask before you buy
- Which zones need information, which need advertising, and which need both?
- What pitch and brightness do you recommend for each zone?
- How does the content software connect to our live data?
- Can we override all screens with an emergency message?
- What redundancy and remote monitoring are included?
- Are outdoor screens rated IP65 or higher and designed for our climate?
- How will installation work around security and operating hours?
For related reading, see our guides to LED displays for public information systems and LED for digital out-of-home advertising. Browse all our LED display guides, or contact us to plan displays for your terminal or station.
FAQ
Why are LED displays used in airports instead of LCD?
LED is brighter, can be made very large without bezels, and stays readable in glass-roofed terminals. LCD is still used for small screens seen up close.
What pixel pitch suits an airport concourse?
Many concourse walls use about 1.8–3 mm. Large overhead walls seen from far away can use coarser pitch.
Can LED screens show live flight information?
Yes. The content software connects to the airport’s data systems so flight and gate information updates automatically.
How are outdoor screens at stations protected?
They use sealed cabinets rated IP65 or higher on the front, high brightness and mounts designed for wind and vibration.
What happens if a screen fails in a 24/7 hub?
Redundant power and data, remote monitoring and on-site spares let staff fix most faults quickly, often by swapping a module from the front.