On a trade show floor you have a few seconds to stop someone walking past. Hundreds of booths compete for the same people, and most of them have a screen of some kind. The displays that work are the ones that are visible from the aisle, sized to the booth, easy to set up inside the show’s labour and power rules, and running content made for people on the move.
This guide covers the LED formats exhibitors use, how to size and place them, how to plan for show logistics, and how to tie the display to leads rather than just looks. For booth-specific advice, call 888-631-5880.
What a trade show display must do
- Be seen from the aisle and across the hall. Height and brightness matter more than fine detail.
- Explain the offer quickly. A passer-by should know what you sell within a few seconds.
- Support conversations. Once someone stops, staff need a screen for demos and walkthroughs.
- Travel and rebuild well. Hardware is set up and struck many times a year by different crews.
LED formats for exhibition booths
| Format | Best use in a booth | Typical pitch | Setup effort |
|---|---|---|---|
| Modular LED back wall | Main brand and video wall, 10×10 ft upward | about 2.5–3.9 mm | Moderate: frame or stacking, processor |
| LED posters | Inline booths, entrances, demo stations | about 1.8–2.5 mm | Low: freestanding, plug in |
| Hanging LED sign or header | Island booths, visibility across the hall | about 3.9–6 mm | Higher: rigging and venue approval |
| Fine-pitch demo screen | Product demos, software walkthroughs | about 1.2–1.9 mm | Low to moderate |
| Creative pieces (columns, curves, fans) | Attention-grabbing focal points | varies | Varies by design |
Modular LED walls
Most exhibitors build their main screen from rental-style cabinets that lock together quickly, often 500×500 mm or 500×1000 mm. They can be ground-stacked on a base or hung from a truss. Our exhibition LED displays and trade show LED displays are designed for frequent setup, with tool-free locks and flight cases.
LED posters
For 10×10 and 10×20 inline booths, two or three LED posters can do more than one large wall. They are fast to set up, easy to ship, and can be placed at the aisle edge where people actually walk. Several posters can also be linked into a single wider screen.
Hanging signs and headers
Island booths often hang an LED ring or header above the space so it can be seen from far across the hall. Rigging needs venue approval, certified points and usually the show’s own rigging crew, so plan it early.
Creative focal points
A curved wall, an LED column or a holographic-style LED fan can be the single item people remember. See LED fans for trade show attractions for one popular option.
Sizing and placement
Visitors see your booth first from 10–30 m away, then from 1–3 m inside it. Design for both distances:
- Height first. Raise the main screen above head height, so it is visible over crowds. The bottom edge often sits around 1–1.5 m off the floor.
- Pitch for the aisle. The aisle is usually 3 m or more from the back wall, so about 2.5–3.9 mm is a common choice. Use finer-pitch screens at demo stations where people stand close.
- Brightness for the hall. Exhibition halls are brightly lit. Indoor LED around 1,000–1,500 nits holds up well; very bright settings can be uncomfortable up close, so plan to tune it on site.
- Respect sightlines. Many shows limit how tall inline booth elements can be and how far back they must sit. Check the exhibitor manual before ordering a wall size.
Show logistics that catch people out
The display is only as good as the setup plan. Before each show, confirm:
- Power. Order enough electrical service for the LED wall, processor and lighting, and know where the drop will arrive in your booth.
- Labour rules. Some venues require union or show labour for certain tasks, including rigging and electrical connections.
- Height and weight limits. Hanging signs and tall walls need approval and may need engineering drawings.
- Shipping and storage. Flight cases need space in the booth or advance warehouse booking, and they must arrive on time.
- Setup time. Allow time to build, test, calibrate and load content before the show opens, plus a fallback if a module fails.
- Spares. Bring spare modules, cables and a backup media player.
For more on transport and build, see our guide to portable exhibition LED setups.
Content that turns attention into leads
- Lead with the problem you solve, in a few words, large enough to read from the aisle.
- Use motion at the top of the screen to catch eyes over the crowd, and keep detail lower for people inside the booth.
- Keep loops short, around 30–60 seconds, so anyone passing sees the full message.
- Include a clear next step: a QR code, a demo time, a giveaway or “ask us about.”
- Switch modes. Run attract content when the booth is quiet and switch to live demos or presentations when a crowd gathers.
Measure success with leads, not compliments. Count scans, demo bookings and conversations, and compare across shows to see which content and layouts work best.
Buy, rent or both?
Exhibitors doing several shows a year often buy a core kit, such as a back wall and a few posters, and rent extra panels for larger flagship events. Occasional exhibitors usually rent. Buying makes sense when you know your booth sizes and can store and transport the gear. Renting suits one-off events or very large builds. See LED wall rental if you are weighing both.
What drives the cost
The main factors are screen area, pixel pitch, frames and rigging, cases and shipping, power orders, labour at each venue, content creation and the number of shows per year. Hanging signs and creative builds add engineering and approval time.
Questions to ask before you buy
- What booth sizes will we use this year, and can the kit reconfigure between them?
- How long does setup take with a two-person crew?
- What power does the full setup draw?
- How does the kit pack and ship, and what does it weigh?
- What happens if a module fails on the show floor?
- Can we add rental panels for larger shows?
Read our other LED display guides, or contact us with your show calendar and booth sizes.
FAQ
What size LED wall do I need for a 10×20 booth?
Many 10×20 booths use a back wall around 3–4 m wide, or two to three LED posters. Check the show’s height limits for inline booths first.
What pixel pitch works best at trade shows?
About 2.5–3.9 mm for back walls viewed from the aisle, and about 1.2–1.9 mm for demo screens that people stand close to.
Do I need special power for an LED booth display?
Yes. Order enough electrical service through the show for the wall, processor and lighting, and confirm where the power drop will be.
Is it better to buy or rent trade show LED?
Frequent exhibitors often buy a core kit and rent extra for big shows. Occasional exhibitors usually rent.
How do I measure if my booth display worked?
Track leads, QR scans, demo bookings and conversations per show, then compare layouts and content across events.