FAST NATIONWIDE SHIPPING | PROJECT SUPPORT | COMMERCIAL-GRADE LED SOLUTIONS

Free Shipping Sitewide on All LED Display Products Shipping from California & Florida Warehouses

A custom LED display is one designed for a specific place and purpose: a shape, size, mounting or environment that a catalog product does not cover. Custom projects can produce a space-defining result, but they also carry more decisions and more ways to go wrong than buying a standard screen. The difference between a smooth project and a painful one is usually the quality of the brief and the checks along the way.

This guide sets out a buyer’s process for custom LED: deciding what kind of custom you need, writing a brief suppliers can price accurately, fixing the key specs, and judging proposals. To see examples, visit our custom LED displays page or call 888-631-5880.

First, decide what kind of custom you need

“Custom” covers a wide range. Some projects only need a non-standard size; others need new parts designed from scratch. Knowing where you sit tells you how much time, design effort and risk to expect.

Level of custom Example Design effort Main risk
Custom size from standard cabinets An extra-wide lobby wall Low Size steps not matching the opening
Custom mounting or integration Flush recess in stone or timber Medium Tolerances, heat and service access
Curves and corners Curved wall, column wrap, 90° corner Medium Visible seams, bend limits
Special shapes Sphere, cut-out logo, ribbon High Custom parts, content mapping
Special environments Outdoor, marine, floor, high heat Medium to high Sealing, loading, thermal design
Interactive or integrated systems Sensors, cameras, touch, show control High Software and testing time

If a standard product gets you 90 percent of the way there, it is often wiser to adapt the space slightly than to custom-build. Save custom effort for the parts that make the space special.

Write a brief suppliers can price

Vague briefs get vague quotes that are hard to compare. A good brief includes:

  1. Purpose: what the display is for and what success looks like.
  2. Location: indoor or outdoor, photos, drawings and measurements of the space.
  3. Viewers: nearest and farthest viewing distances, and viewing angles.
  4. Size and shape: target dimensions, any curves, and how exact they must be.
  5. Mounting: wall, floor, ceiling or freestanding, and what the structure is made of.
  6. Content: video, live feeds, data, interactive, and who will create it.
  7. Operating hours: how many hours a day and days a week it runs.
  8. Dates: when it must be working, and any site access limits.
  9. Scope: whether you need supply only, or design, structure, install and content too.

Fix the core specs

Pixel pitch

Set it from the nearest regular viewer. As a rule of thumb, allow about 1 m of comfortable viewing distance per 1 mm of pitch, and expect content to read acceptably to about three times that in meters. On custom shapes, check which pitches are actually available in the module type needed; curved and cut modules may come in fewer options.

Brightness

Indoor displays usually need about 600–1,500 nits, window-facing ones about 2,500–5,000, and outdoor ones about 5,000–8,000 or more. Ask for automatic or scheduled dimming.

Protection

Outdoor fronts should be IP65 or higher. Displays within reach need a protective surface or guard. Floors need load ratings and anti-slip surfaces.

Refresh rate

If cameras will see it, ask for 3,840 Hz or higher and a test on camera.

Structure, power and service

Ask for weight, maximum and average power, heat output and service access method. These shape the building work as much as the LED does.

Review drawings, maps and samples

Before anything is manufactured, a good supplier should provide:

Check the drawings against your site measurements and get the structural engineer, architect or facilities team to review them. Approving drawings is your last cheap moment to change things.

How to compare suppliers

Price per square meter is a poor way to compare custom proposals, because each quote may include different things. Line them up on scope instead:

Agree how you will accept the display

Decide in advance what “finished” means, and write it into the order. A simple acceptance test at handover protects both sides. It usually covers a full-screen check for dead or dim pixels, color and brightness uniformity across the surface, a look at seams and corners from the main viewing positions, playback of real content at native resolution, a camera test if the display will be filmed, and a check that dimming, scheduling and remote control work as described.

Ask for the as-built drawings, the pixel map, processor settings and a spares list at handover. Those documents make future service and content work far easier, especially if the people who planned the project move on.

Where custom projects go wrong

What drives cost

The main drivers are area and pitch, the level of customization, structure and engineering, installation access, and content. Custom modules and frames cost more than standard ones, and the design hours add up on complex shapes. Outdoor and floor applications add sealing and strength. Ask for a breakdown so you can see where the budget goes and where a small design change could save money.

Custom LED buyer’s checklist

For ideas and examples, see our guides to custom LED in branded environments and creative LED displays, and our creative LED products. Browse all our LED display guides, or contact us with your brief.

FAQ

How long does a custom LED display take?

It depends on complexity. A custom size from standard cabinets can be quick, while special shapes need extra time for design, approval and manufacture.

Is custom LED much more expensive than standard?

Custom sizes from standard parts may cost little extra. Special shapes, structures and interactive systems add more because of design and custom parts.

What should I send a supplier to get a quote?

Photos, measurements and drawings of the site, viewing distances, the content you plan to show, mounting details, dates and the scope you need.

Can I see the design before it is built?

You should. Ask for drawings, a pixel map and, for unusual shapes, a sample or test build.

Who makes content for a custom-shaped display?

Your agency or in-house team can, using the pixel map and templates from the LED supplier. Plan this early so content is ready at handover.