FAST NATIONWIDE SHIPPING | PROJECT SUPPORT | COMMERCIAL-GRADE LED SOLUTIONS

Free Shipping Sitewide on All LED Display Products Shipping from California & Florida Warehouses

Exhibition LED is built for a different life than a wall in an office. It gets packed, trucked, unloaded, assembled under time pressure by changing crews, run hard for a few days, then torn down and shipped again. A panel that looks great in a showroom can be a poor exhibition choice if it is heavy, slow to connect, fragile at the corners or awkward to service on a show floor.

This guide walks through the decisions that matter when choosing exhibition LED displays: format, pitch, brightness, cabinet design, processing, power, transport and content. It finishes with a checklist you can use with any supplier. For advice on a specific booth or event program, call 888-631-5880.

Step 1: Decide what the display is for

Write down how the display will be used across your event calendar, not just at the next show:

A kit that can reconfigure between sizes and uses is usually worth more than one perfect wall for a single show.

Step 2: Choose the format

Format Choose it when Trade-off
Rental-style modular cabinets You need walls of different sizes across events Needs a frame or ground stack, a processor and some setup skill
LED posters Inline booths, entrances, quick setups, small teams Fixed size per unit, smaller overall image
All-in-one LED display A single fine-pitch screen for demos or meeting pods Fixed size, less flexible for large walls
Flexible or curved modules Columns, curved walls, distinctive shapes More design time and careful handling

Most active exhibitors end up with modular cabinets for the main wall and a few LED posters for flexibility. Browse exhibition LED displays for modular options.

Step 3: Pick pixel pitch for real viewing distances

Use about 1 m of comfortable viewing distance per 1 mm of pitch as a starting point. Visitors standing at a back wall from the aisle are often 3–5 m away, which points to roughly 2.5–3.9 mm. Demo screens viewed at arm’s length need much finer pitch, around 1.2–1.9 mm. As an outer limit, an image typically still looks acceptable out to about 3 times the pitch in meters (for example, about 12 m for 3.9 mm), though beyond comfortable distance you mainly see the big shapes.

Finer pitch costs more and uses more processing. Choose it where people genuinely stand close, not everywhere.

Step 4: Get brightness and refresh right

Step 5: Look closely at cabinet design

This is where exhibition-grade products differ most from fixed-install panels.

Step 6: Plan processing and content playback

The processor scales your content to the wall’s pixel resolution and manages inputs. Check that it supports the wall size you will build, accepts the inputs you need (laptop, media player, camera), and lets you switch quickly between attract loops and live presentations. Keep a backup playback device and a copy of every file on site. Our controller basics guide explains the parts.

Step 7: Check power and logistics

  1. Calculate total power draw at typical brightness, and order show power to match.
  2. Confirm how many cabinets fit in each flight case and the total shipping weight.
  3. Time a full build and teardown with your crew before the first show.
  4. Plan where cases are stored during the event.
  5. Pack spares: modules, receiving cards, power supplies and cables.

For packing and setup detail, see our guide to portable exhibition LED setups.

Step 8: Plan content for the format

Build content at the wall’s exact pixel resolution. If your kit builds several sizes, create master templates for each layout. Keep the main message high on the wall and large enough to read from the aisle, and use the lower part for detail visitors read once they step into the booth.

Common mistakes to avoid

What drives the cost

The biggest factors are pixel pitch and total area, cabinet build quality and weight, processing, flight cases, and whether you need both indoor and outdoor kits. Ongoing costs include shipping, show labour and power, storage and spare parts. Renting extra panels for one or two large shows a year is often cheaper than owning a kit sized for the biggest event.

Exhibition LED buying checklist

More help is available in our LED display guides, or contact us with your event calendar.

FAQ

What makes an LED panel suitable for exhibitions?

Light cabinets, quick tool-free locks, protected corners, robust connectors and easy module swaps. These matter more at shows than in fixed installations.

What pixel pitch should I choose for exhibition displays?

Typically about 2.5–3.9 mm for back walls seen from the aisle, and about 1.2–1.9 mm for screens people view up close.

Can one exhibition kit work indoors and outdoors?

Usually not. Outdoor use needs higher brightness and IP65-rated fronts, so most exhibitors keep indoor and outdoor kits separate or rent for outdoor events.

How heavy are exhibition LED cabinets?

A typical 500×500 mm die-cast cabinet weighs about 6–9 kg. Check the total case weight for shipping.

Should I buy LED posters or a modular wall for my booth?

Posters suit small booths and quick setups. A modular wall gives a larger image and more layouts. Many exhibitors use both.