Indoor LED displays cover a wide range: a 1.2 mm boardroom wall, a 2.5 mm retail feature wall, a church stage backdrop, a lobby screen behind a reception desk, an all-in-one LED display that replaces a meeting-room TV. The questions are similar for all of them, but the answers change a lot with the room. This guide gives you a practical order of decisions and the typical ranges to check quotes against.
If you already know you need a large wall, our direct view LED video walls page is a good starting point. If you are not sure whether LED is the right technology at all, read the comparison at the end first.
Start with the room, not the product
Before looking at datasheets, collect five facts about the space:
- Viewing distances. The closest seat or standing position, and the farthest.
- Wall size and structure. Usable width and height, what the wall is made of and whether it can carry the load.
- Ambient light. Windows, skylights, stage lighting or bright retail lighting.
- Use. Presentations and spreadsheets, video and brand content, live camera feeds, or a mix.
- Who runs it. An AV team, a marketing team or whoever is in the room.
These facts settle pitch, brightness, format and control before you compare a single product.
Pixel pitch for indoor spaces
Indoor viewers are usually close, so indoor walls use finer pitches than outdoor signs. The rule of thumb is about 1 m of viewing distance for each 1 mm of pitch for a comfortable image, with acceptable viewing out to about three times that in meters.
| Space | Closest viewer | Typical pitch |
|---|---|---|
| Boardroom, huddle room, control room | About 1.5–3 m | About 0.9–1.8 mm |
| Corporate lobby, showroom | About 2–4 m | About 1.5–2.5 mm |
| Retail feature wall | About 2–5 m | About 1.9–3 mm |
| Auditorium, church, ballroom | About 5–10 m to the front row | About 2.5–4 mm |
| Arena concourse, atrium | About 6 m and up | About 3–6 mm |
Text-heavy uses such as spreadsheets, dashboards and fine print need a finer pitch than video. If people will read small text at the screen, lean toward the fine end. For the very finest pitches, see fine pitch LED displays.
Resolution: match the content
The finished wall has a fixed pixel resolution, set by its size and pitch. Check it against your sources. A wall that is about 4 m wide at 1.5 mm pitch is roughly 2,670 pixels across, more than full HD but less than 4K. A 2.5 mm wall of the same width is about 1,600 pixels across. Your controller scales content to fit, but you get the sharpest image when content is built at the wall’s native resolution.
Brightness: less than you think
Indoor walls typically run at about 600–1,500 nits. A boardroom with no windows may only need 300–600 nits in daily use. Walls facing large windows or in sunlit atriums may need about 2,500–5,000 nits. Too much brightness indoors causes eye strain and makes skin tones look harsh on camera, so ask whether the screen keeps good grayscale when dimmed.
COB or SMD
Most indoor LED walls use one of two LED packaging methods:
- SMD (surface-mounted device): the most common type. Each pixel is a small package soldered to the board. Mature, widely available and well understood.
- COB (chip on board): the LED chips are mounted directly on the board and covered with a protective layer. It resists knocks and dust better and is popular for fine pitches and touchable locations.
Both can look excellent. The right choice depends on pitch, budget and how exposed the surface is. See COB vs SMD LED displays for a detailed comparison.
Format: custom wall or all-in-one
Custom-built walls
Built from cabinets, often 600×337.5 mm (16:9 shape) or 500×500 mm, to any size. They suit lobbies, auditoriums and feature walls where size and shape are specific to the space. They need a mounting structure, a controller and professional installation.
All-in-one LED displays
Pre-configured screens, often in 16:9 sizes from about 110 to over 200 inches diagonal, with the controller, power and inputs built in. They work like a very large TV: plug in a laptop or room system and present. Explore COB all-in-one LED displays and SMD all-in-one LED displays.
Specialty formats
LED posters, transparent LED, flexible LED and LED floors fill other roles. Posters are portable portrait screens; transparent LED goes on glass; flexible LED wraps curves.
Installation and building details
- Wall loading. Indoor cabinets often weigh around 6–10 kg each, sometimes more. A structural check is wise for large walls.
- Depth. Wall-mounted LED often sits about 100–150 mm from the wall including the frame. In corridors, check how far wall-mounted objects may protrude.
- Service access. Front-service cabinets allow flush mounting with no access space behind. Rear-service needs a walkway.
- Power. Typical draw is well below maximum, but circuits are sized for the maximum. Plan dedicated circuits.
- Heat and noise. Fanless designs are quieter in meeting rooms, studios and places of worship.
- Cameras. If the wall will be filmed or streamed, look for a refresh rate of 3,840 Hz or higher.
LED or LCD?
LCD video walls are still a good choice for some rooms. LED wins when you want no visible seams, a very large image, a non-standard shape or higher brightness. LCD can win on cost for smaller walls viewed very close, especially for text-heavy use. Consider both if your wall is under about 3 m wide and viewed from a meter or two away.
Questions to ask before you buy
- What is the native resolution of the finished wall, and does it suit our content?
- What brightness will we actually run at, and how does the image look when dimmed?
- Is it COB or SMD, and why is that the right choice for this space?
- Is it front-service, and how deep will the finished install be?
- What is the weight per cabinet and total load on the wall?
- What are the maximum and typical power draws?
- Is it fanless or fan-cooled, and how loud is it?
- What refresh rate does it run at if it is filmed?
- How do people in the room switch sources and control it?
What drives the cost
Pitch is the biggest factor: halving the pitch roughly quadruples the number of LEDs in the same area. Wall size, COB versus SMD, custom shapes, mounting structure, controllers, installation labour and integration with room control systems all add to the total. All-in-one units can reduce installation and integration costs for standard sizes.
For help narrowing down options, read our LED display guides, call 888-631-5880 or contact us with your room dimensions and viewing distances.
FAQ
What pixel pitch should an indoor LED wall have?
Use about 1 m of closest viewing distance per 1 mm of pitch. Boardrooms often use about 0.9–1.8 mm, while auditoriums often use about 2.5–4 mm.
How bright should an indoor LED display be?
Typically about 600–1,500 nits at maximum, with daily use often lower. Window-facing screens may need about 2,500–5,000 nits.
Is an all-in-one LED display better than a custom wall?
For standard 16:9 sizes in meeting rooms and lobbies, all-in-one units are simpler to install and use. Custom walls suit unusual sizes, shapes and large spaces.
Do indoor LED walls make noise?
Some use fans that produce a low hum. Fanless designs are available for quiet rooms such as boardrooms and studios.
Can an indoor LED wall be filmed?
Yes, if it has a high refresh rate, ideally 3,840 Hz or more, and runs at a sensible brightness for the camera.