FAST NATIONWIDE SHIPPING | PROJECT SUPPORT | COMMERCIAL-GRADE LED SOLUTIONS

Free Shipping Sitewide on All LED Display Products Shipping from California & Florida Warehouses

Choosing an SMD LED display is easier when you work in a set order. Start with the job the screen has to do and the room it lives in, and most of the specs follow. Start with a spec sheet and it is easy to pay for numbers you will never see.

This guide walks through that order, step by step, then shows how to read a supplier’s spec sheet and what to ask before you sign. If you want to see the product range first, look at our direct view LED video walls and pre-built SMD all-in-one LED displays, or call 888-631-5880.

Step 1: Write down the job

Before anyone talks about pitch, write a short brief. It should answer five things:

  1. What will it show? Video and brand films, live camera feeds, spreadsheets and dashboards, slides, menus, or a mix.
  2. Who is watching, and from where? Note the nearest and farthest regular viewing positions in meters.
  3. Where does it go? Indoor, outdoor, or indoor facing out through glass.
  4. How big? The space available, and any target resolution such as full HD.
  5. How long does it run? A few hours a day, all business hours, or around the clock.

A wall that shows spreadsheets to people 2 m away needs very different specs from a storefront sign seen from across a road, even if both are SMD.

Step 2: Set the pixel pitch from the nearest viewer

Pixel pitch is the gap between pixel centers in millimeters. A common rule of thumb is about 1 m of comfortable viewing distance per 1 mm of pitch, and the image still holds up to about three times that distance in meters. So a 2.5 mm wall is comfortable from around 2.5 m. If your nearest regular viewer is 3 m away, a pitch around 2.5–3 mm is usually enough. Fine text and data dashboards push you finer; video seen from a distance lets you go coarser.

Pitch also sets resolution. Divide the width and height in millimeters by the pitch to get the pixel count. A 3 m wide wall at 2.5 mm is 1,200 pixels across. If your content must be shown pixel-for-pixel at full HD, size and pitch have to work together.

Step 3: Match brightness and protection to the site

Indoor SMD displays usually run about 600–1,500 nits, which is plenty for most rooms. Screens behind a shop window or in a sunny atrium typically need about 2,500–5,000 nits. Full outdoor screens usually need about 5,000–8,000 nits or more, depending on whether they face direct sun.

For outdoor or semi-outdoor locations, check the ingress protection rating. The front of an outdoor cabinet should be IP65 or higher, and the rear should be sealed to suit the mounting. Also ask about operating temperature, cooling and whether the screen has a light sensor for automatic dimming at night.

Step 4: Decide on cabinet, service and structure

SMD displays are built from cabinets that bolt together. For indoor walls, 500×500 mm and 500×1000 mm cabinets are common, and those sizes make it easy to plan a wall in half-meter steps. Ask for the weight per cabinet and per square meter, since this decides whether a wall can carry it or whether you need a freestanding frame.

Choose front service if the display will sit tight to a wall, and rear service if technicians can walk behind it. Front-service modules are removed with a magnetic or suction tool, which keeps the install shallow.

Step 5: Plan control, content and power

Every LED display needs a processor or sending card to map the video signal to the cabinets. Ask what inputs it accepts, whether it can scale content, and how many screens it can run. Then decide how content gets there: a media player with scheduling software for signage, or a live switcher for events and meeting rooms.

Power is usually listed as maximum and average per square meter. Size the electrical supply on the maximum and estimate running costs on the average. Ask for the heat load too, especially for large indoor walls.

How to read an SMD spec sheet

Spec line What it means What to look for
Pixel pitch Distance between pixels in mm Matches your nearest viewing distance
LED package Size code of the SMD LED, such as 1515 or 2121 Smaller packages suit finer pitch; ask why this one was chosen
Brightness (nits) Maximum light output after calibration Right for the site, with dimming
Refresh rate How often each LED is updated per second 3,840 Hz or higher if cameras will see it
Gray scale Number of brightness steps per color Higher values give smoother dark scenes
Viewing angle Angle at which brightness halves Wide horizontal angle for side seating
IP rating Dust and water protection IP65 or higher on the front outdoors
Power (max / avg) Watts per cabinet or per m² Supply sized on max, running cost on average
Service access Front, rear or both Fits your mounting position

If two quotes have the same pitch but very different prices, the difference is often in the lines further down this table: LED quality, refresh rate, calibration, cabinet build and the processor.

Common mistakes to avoid

What affects the price

The biggest cost drivers are pitch and area, followed by indoor versus outdoor build, the structure, installation access and labour, and the control and content system. Custom shapes, curves and corners add engineering. Rather than comparing price per square meter alone, compare complete quotes that include the processor, spares, mounting and commissioning.

Questions to ask your supplier

To see how these choices play out in practice, read our guides to SMD LED video walls for commercial spaces and outdoor SMD LED displays, or browse all our LED display guides. When your brief is ready, contact us and we will help you match it to a display.

FAQ

Is SMD better than COB?

Neither is better in every case. SMD offers a wider range of pitches and is common indoors and outdoors, while COB has a sealed surface that suits close, touchable fine-pitch walls.

What pixel pitch should I choose for a lobby?

Many lobby walls are seen from about 3–6 m, so a pitch around 2.5–4 mm is common. Go finer if people will read small text up close.

How bright should an indoor SMD display be?

Usually about 600–1,500 nits. Walls near large windows or facing out through glass need more.

Can I install an SMD display myself?

Small all-in-one units are designed for simple setup. Larger walls need structural, electrical and commissioning work by qualified installers.

Do I need a spare parts kit?

Yes, it is good practice. Spare modules from the same batch let you replace a failed module quickly without a color mismatch.