Three LED quotes for the “same” wall can differ so much that they look like three different projects. One includes the processor and installation, another assumes you will provide the structure, a third quotes a brighter screen with a different pitch. Choosing on the bottom-line number alone is how buyers end up with the wrong wall, or with a cheap wall that becomes expensive to own.
This guide shows how to compare LED display suppliers fairly and select a vendor you will be happy to work with for years. It covers the types of supplier you will meet, how to normalize quotes, a simple scoring method, and the warning signs to watch for. To see what we offer, browse our LED display products or call 888-631-5880.
Know what kind of supplier you are talking to
| Supplier type | Typical strengths | Things to confirm |
|---|---|---|
| Manufacturer selling direct | Deep product knowledge, factory-level spares and engineering | Who installs and supports locally; time zones and languages |
| Specialist LED supplier or distributor | Range across products and pitches, local stock of knowledge and support | Which products they back with local service and spares |
| AV systems integrator | Designs the whole system: screen, control, audio, cameras, installation | Their LED experience and who provides the LED hardware |
| Rental and staging company | Event expertise, crews, short-term supply | Suitability of touring products for permanent use |
None of these is better in every case. What matters is that the supplier’s strengths match your project and that responsibilities are clear when several parties are involved.
Start with a written brief
You cannot compare quotes fairly if each supplier is answering a different question. Send every supplier the same brief: purpose, location, size, viewing distances, environment, content types, inputs, operating hours, service expectations, budget range and timing. Our guide to questions to ask before buying an LED display helps you build it.
Normalise the quotes
Before scoring, line up the proposals so you are comparing like with like. Build a simple sheet with these rows:
- Screen: pitch, active size, resolution, cabinet size and weight.
- Brightness: rated nits and the level you will actually run at.
- Refresh rate and gray scale: important if cameras will film the wall; look for 3,840 Hz or more for camera work.
- LED type: SMD, GOB or COB, and front or rear service.
- Power: maximum and typical draw per square meter.
- Environment: IP rating for outdoor or semi-outdoor use; front IP65 or higher outdoors.
- Control: processor, sending cards, software, licenses.
- Scope: structure, installation, freight, commissioning, training, spares, removal of packaging.
- After-sale: warranty terms, support response, parts availability.
Any blank cell is a question for that supplier. Often the cheapest quote is cheapest because something is missing. Our article on LED video wall cost factors explains which items move the price.
Score suppliers on more than price
A weighted scorecard keeps the decision objective and gives you a record of why you chose. Adjust the weights to your project; a control room might weight support and reliability higher, a retail rollout might weight price and consistency across sites.
| Criterion | Example weight | What a high score looks like |
|---|---|---|
| Fit to brief | 25% | Pitch, size, brightness and features match the stated needs without overspec |
| Product quality and specs | 20% | Clear, testable specs; samples or demo look right at your viewing distance |
| Service and support | 20% | Named contacts, clear response terms, spares plan, training |
| Total cost of ownership | 20% | Competitive purchase price plus sensible power, support and software costs |
| Experience and references | 10% | Similar projects they can show and customers you can speak to |
| Communication | 5% | Clear answers, realistic promises, good questions about your needs |
Have two or three people score each proposal separately, then compare results. Large differences between scorers usually reveal an unanswered question or a different reading of the brief, which is worth resolving with the supplier before you decide. Keep the scoring sheet with the project file; it helps explain the choice to finance and gives a useful baseline if the project is reviewed later.
If two suppliers finish close together, a short clarification meeting with each often settles it. Ask them to walk through how they would deliver the installation and what they would need from your team.
Check claims in the real world
See it at your distance
Ask for a sample cabinet or a demo, and view it from your actual viewing distance with content like yours. A pitch that looks fine on a spec sheet can look different in person, in either direction.
Visit or call references
Speak to customers with a similar project and ask how the install went, how support has worked and what they would do differently. A supplier that cannot offer any relevant reference is a risk for a large project.
Test the support before you buy
Ask how a typical fault is handled: who answers, how fast, where spares are held and how a technician gets to site. Our LED display service and support guide lists what good support looks like.
Read the warranty properly
Compare what is covered, for how long, who pays for labour and shipping, and how claims are made. Our guide to LED warranty questions sets out what to check.
Red flags when selecting an LED display vendor
- Specs that are vague, inconsistent or impossible to verify, such as brightness with no measurement basis.
- No questions about your viewing distances, content or environment before quoting.
- Quotes that leave out the processor, structure or installation without saying so.
- Pressure to commit quickly with unusually large deposits and little detail.
- No clear answer on who provides support and spares locally.
- Recommending a much finer pitch or higher brightness than your viewing distance and site need.
- Unwillingness to provide a sample, demo or references for a significant project.
Questions to ask every supplier
- Which parts of the scope do you deliver yourselves, and which are subcontracted?
- Who will be our day-to-day contact during the project and afterwards?
- Can we see a sample at our viewing distance, or visit a similar installation?
- What spares are included, and how long will matching parts remain available?
- What happens if a fault appears in the first weeks after handover?
- What do you need from us, and by when, to meet the timeline?
Once you have a preferred supplier, put the agreed scope, specs, timeline, acceptance tests and support terms into the contract. For more help, read our LED display guides or contact us with your brief, or browse direct view LED video walls to start comparing products.
FAQ
How many LED suppliers should I get quotes from?
Three is a common number for a meaningful comparison without overwhelming the team. For very large or complex projects, a formal tender may involve more.
Should I always choose the cheapest quote?
Not unless it matches the brief and scope of the others. Check what is included and compare total cost of ownership, not just purchase price.
Is it better to buy from a manufacturer or an integrator?
It depends on the project. Integrators suit complete AV systems; specialist suppliers and manufacturers suit projects focused on the LED screen itself, provided local support is clear.
What should be in the contract?
Scope, specs, timeline, payment terms, acceptance tests, warranty, support terms, spares and who is responsible for site work.
How do I verify LED specs?
Ask how each figure was measured, view a sample at your real viewing distance, and check the same product at a reference site where possible.