FAST NATIONWIDE SHIPPING | PROJECT SUPPORT | COMMERCIAL-GRADE LED SOLUTIONS

Free Shipping Sitewide on All LED Display Products Shipping from California & Florida Warehouses

Buying an LED display is a bigger decision than buying a TV. You are choosing pixel pitch, brightness, cabinet design, control system and a support relationship that will last years. The good news is that the right questions, asked early, sort out most of the risk. They also make quotes easier to compare, because every supplier has to answer the same points.

Below are the questions we would ask, grouped by topic. Some are questions for your own team; most are for suppliers. Use them as a checklist when you gather quotes, or call 888-631-5880 to talk through your answers. You can also browse our direct view LED video walls while you plan.

Questions for your own team first

Questions about image quality

Which pixel pitch suits our viewing distance?

A common rule of thumb is about 1 m of comfortable viewing per 1 mm of pitch, with about three times the pitch in meters as the farthest distance that still looks good. Ask the supplier to justify their recommendation against your actual distances.

How bright is it, and how bright do we need?

Indoor walls usually need about 600–1,500 nits, window-facing screens about 2,500–5,000 and full outdoor screens about 5,000–8,000 or more. Ask whether brightness can be scheduled or sensor-controlled. Our guide to LED brightness and nits explains the numbers.

What is the refresh rate and gray scale?

If cameras will film the screen, for broadcast, streaming, worship or events, ask for a refresh rate of 3,840 Hz or more to avoid flicker and scan lines on camera. Higher gray scale helps smooth gradients at low brightness. See LED refresh rate explained.

How does it look off-axis and in dark scenes?

Ask about viewing angle, color shift at wide angles, contrast and black level. Seeing a sample in person is the best test.

What is the native resolution of the finished wall?

This decides how content must be built and whether common video formats will fill the screen cleanly.

Questions about build and durability

Questions about control and content

Our guide to LED controller basics covers how these pieces fit together.

Questions about installation

Questions about support and warranty

Questions about cost

Questions to answer after a demo or site visit

Seeing a screen in person is the best reality check. After a demo or a visit to a reference installation, ask your team:

Write the answers down straight away and compare them across suppliers. Impressions fade quickly, and a short written record makes the final decision far easier to explain.

Quick reference: specs to request

Spec Typical range or guideline Why it matters
Pixel pitch About 1 m viewing per 1 mm of pitch Sharpness at your distance; biggest cost driver
Brightness Indoor about 600–1,500 nits; window about 2,500–5,000; outdoor about 5,000–8,000+ Visibility in ambient light
Refresh rate 3,840 Hz or more for camera use Flicker-free filming
IP rating IP65 or higher at the front outdoors Protection from water and dust
Cabinet size Commonly about 500×500 or 500×1000 mm Fit to the wall, handling, weight
Power Maximum and typical per square meter Electrical design and running cost
Service access Front, rear or both Installation depth and maintenance

To avoid the traps other buyers fall into, read common LED display buying mistakes. For more help, see our LED display guides or contact us with your answers to the questions above.

FAQ

What is the most important question before buying an LED display?

How far away the viewers will be. Viewing distance decides pixel pitch, which shapes sharpness and much of the cost.

Do I need a high refresh rate?

If cameras will film the screen, yes; aim for 3,840 Hz or more. For signage viewed only by people, standard refresh rates are usually fine.

Should I see a sample before buying?

Whenever possible. Viewing a sample at your real distance with your own content is the best way to confirm pitch and brightness.

What should be included in an LED display quote?

Screen, processor and control, mounting, installation, commissioning, freight, spares, training, warranty terms and support details, with anything excluded clearly stated.

How bright should an indoor LED wall be?

Usually about 600–1,500 nits, adjusted for the room. Many lobbies and meeting spaces run comfortably at the lower end.