An LED display built for a lobby and one built for a roadside sign may look alike on a spec sheet, but they are designed for very different jobs. The outdoor screen has to beat the sun, survive rain, heat, cold and wind, and be read from across a car park. The indoor screen has to look sharp from a few meters away without dazzling anyone.
Choosing the wrong type is one of the costliest mistakes in LED buying. An indoor wall moved outside fails quickly, and an outdoor screen inside is usually too coarse and too bright. This guide explains what changes between the two, and where the in-between “window-facing” category fits. For outdoor products, see our outdoor LED displays, or call 888-631-5880.
The three environments
- Indoor: lobbies, meeting rooms, stores, churches, studios and arenas. Controlled light, stable temperature, no water.
- Window-facing or semi-outdoor: screens behind shop glass or under a canopy. They face daylight but are protected from direct rain.
- Outdoor: building facades, roadside signs, stadium exteriors, drive-throughs and plazas. Full sun, rain, dust, temperature swings and wind.
Indoor vs outdoor at a glance
| Spec | Indoor | Window-facing | Outdoor |
|---|---|---|---|
| Brightness | About 600–1,500 nits | About 2,500–5,000 nits | About 5,000–8,000+ nits |
| Typical pixel pitch | About 0.9–4 mm | About 2.5–4 mm | About 4–16 mm |
| Weather protection | Not built for water | Dust and condensation aware | Front IP65 or higher, sealed rear |
| Cabinet | Light, often 500×500 or 500×1000 mm | Light to medium | Heavier, sealed, often larger formats |
| Cooling | Passive or quiet fans | Fans, sun-load aware | Fans, air conditioning or sealed heat paths |
| Power per square meter | Lower | Medium | Highest, due to brightness |
| Typical viewing distance | 1–20 m | 2–15 m | 10–100+ m |
Brightness: the biggest difference
Brightness is measured in nits. Indoors, about 600–1,500 nits is plenty, and most walls run below their maximum for comfort and longer life. Direct sunlight is far stronger, so an outdoor screen typically needs about 5,000–8,000 nits or more to stay readable at midday, especially if it faces south or west. Window-facing screens sit in the middle, at about 2,500–5,000 nits, because glass reflects and the sun moves across it through the day.
Outdoor screens should always include an automatic light sensor. It lowers brightness at dusk and at night so the sign is not glaring, saves power and helps meet local rules. Many towns limit how bright a digital sign may be after dark, so check your local sign code early. Our guide to what nits mean explains brightness in more detail.
Pixel pitch and viewing distance
Pixel pitch is the gap between pixel centers in millimeters. A rule of thumb is about 1 m of comfortable viewing distance per 1 mm of pitch, and about 3× the pitch in meters as the farthest distance that still looks good. Indoor viewers are close, so pitches from about 0.9 mm to 4 mm are common. Outdoor viewers are usually far away and often moving, so 4 mm to 10 mm is typical, with coarser pitches on large roadside boards.
Going finer outdoors is possible but costs more and draws more power, and the extra detail is wasted if nobody stands close. A plaza screen that people walk past at 5 m may justify about 4–5 mm. A highway sign seen from 60 m does not need anything that fine.
Weather, heat and structure
Ingress protection
Outdoor cabinets need a front rating of IP65 or higher, meaning dust-tight and protected against water jets. Ask about the rear rating too, and how cable entries and connectors are sealed. Indoor products are not designed for water, and even a covered outdoor location can expose them to driven rain and condensation.
Temperature and cooling
Outdoor screens face sun load, freezing nights and humidity. Look for a stated operating range that covers your local climate, and ask how the cabinet manages heat in summer. Indoor walls usually rely on the building’s climate control, but they still need ventilation behind them.
Wind load and mounting
An outdoor screen is a sign structure. Poles, facade frames and roof mounts must be designed for wind and the screen’s weight, which is often reviewed by a structural engineer and covered by a permit. Indoor walls need a wall or frame that can carry the cabinets and give service access, but the loads are far simpler.
Service access
Indoor walls are often mounted tight to a wall, so front-serviceable modules that pop out with a magnetic tool are popular. Outdoor signs on poles or facades are frequently serviced from behind through a walk-in cabinet or access doors, though front-service outdoor models exist for flush facade installs. Decide early how a technician will reach a failed module, because it shapes the structure, the clearances and the lift equipment you will need on service days.
Content differences
Indoor content can be detailed. People stand still, so you can show schedules, menus, product detail and longer video. Outdoor content must work at a glance from a distance and often from a moving car. Keep it to one idea per slide, use large bold text, strong contrast and short dwell times. Avoid thin fonts and pale colors that wash out in sun. Check local rules on animation and how often a roadside message may change.
What drives cost
- Environment: outdoor builds need brighter LEDs, sealed cabinets, stronger structure and more power, so they cost more per square meter than indoor at the same pitch.
- Pixel pitch: finer pitch adds cost in both settings.
- Size and shape: total area, curves and corners.
- Structure and permits: outdoor poles, footings, engineering and sign permits can be a large share of the budget.
- Power and data: electrical supply, data runs and remote monitoring.
- Content and control: players, scheduling software and content made for the screen’s resolution.
Checklist: questions to ask
- Will any part of the screen see direct sun, rain or condensation, even occasionally?
- What are the nearest and farthest viewing distances, and are viewers walking or driving?
- What brightness does it reach, and does it have automatic dimming?
- What are the front and rear IP ratings, and the operating temperature range?
- Is service from the front or the back, and how will technicians reach it?
- What power is needed at maximum and at typical brightness?
- What permits, sign codes or structural reviews apply at the site?
For an indoor project, our guide on how to choose indoor LED displays covers pitch and room planning. For outdoor, see weatherproof outdoor LED displays explained. Our indoor range sits under direct view LED video walls. You can browse all our LED display guides, or contact us with your site details.
FAQ
Can I use an indoor LED screen outdoors under a canopy?
It is not recommended. Indoor screens are too dim for daylight and are not sealed against driven rain, dust or condensation.
Can an outdoor LED screen be used indoors?
It can work, but outdoor pitches are usually too coarse for close viewing and the brightness must be turned well down. An indoor product is usually the better buy.
How bright should a shop window display be?
Window-facing screens typically need about 2,500–5,000 nits, depending on how much direct sun hits the glass.
What IP rating does an outdoor LED display need?
A front rating of IP65 or higher is the usual minimum. Also check the rear rating and how cable entries are sealed.
Do outdoor LED signs need permits?
Often, yes. Many areas regulate the size, brightness and message changes of digital signs, so check local sign codes before ordering.